You are here: Home » EXTRUSION BLOG » More Products » PVC Dual Pipe Extrusion Line 20-63mm
PVC Dual Pipe Extrusion Line 20-63mm

PVC Dual Pipe Extrusion Line Description

The PVC dual pipe extrusion line was developed by Bell Machinery combined with foreign technology. The main machine SJZ-51, 55, 65, 80 conical twin-screw extruder, equipped with independent double-tube single-control stainless steel spray setting table, avoids the waste phenomenon of adjusting one tube and affecting the other tube during production. The control double tractor and cutting are integrated with the previous double shaping technology, which makes the operation more flexible and allows you to appreciate the benefits brought by the separate control of the two-pronged operation. The double-tube extrusion pipe diameter is from Ø16 to Ø110, which can make full use of the extruder. Extrusion capacity, even the production of small diameter pipes can reach extremely high output.

PVC Dual Pipe Extrusion Line

PVC dual pipe extruder is suitable for 20-63mm pipe diameter and wall thickness of PVC plastic pipe. Because of its characteristics, it is widely used in oil field raw material gathering and transportation, chemical temperature and corrosion resistance pipes, hot water and warm water supply and drainage pipes, and only Buried high-voltage and ultra-high-voltage power transmission, cable protection and other fields.

PVC Dual Pipe Extrusion Machine Application:

1. Conveyance of water, under pressure
2. Sewerage piping systems
3. Drainage piping systems
4. Electrical, telecommunications engineering pipeline

PVC Dual Pipe Extrusion Machine Video:

PVC Dual Pipe Extrusion Line Technical Parameter:

Pipe range(mm) Extruder model Extruder motor power(KW) Capacity(kg/h)
Φ16-63 Dual pipe SJZ65/132 37 280-350
Φ50-110 Dual pipe SJZ80/156 55 400-550
Φ50-160 SJZ65/132 37 280-350
Φ75-250 SJZ65/132 37 280-350
Φ110-315 SJZ80/156 55 400-550
Φ160-450 SJZ80/156 55 400-550
BRP93/28 67 550-600
Φ315-630 SJZ92/188 110 750-850
BRP107/26 90 750-850
Φ710-1000 BRP135/28 160 1100-1200

Complete PVC Pipe Production Line:

PVC Dual Pipe Extrusion Line

PVC Dual Pipe Extrusion Machine Details:

  • Extruder Part
    Verticle High torque gearbox Gearbox:Sunglung brand,Taiwan Every 48hours clean and fast cooling system, 16mm speed:13m/min*4pcs=52m/min(conduit pipe) 32mm speed:6m/min*4pcs=24m/min(pressure pipe)
  • Mould Part
    Extrusion head inside spider structure, equal distribution & best plasticization. Copper Calibrator with double water ring,stable and fast running on line.
  • Vacuum Tank Part
    1. Optimized design tank and water pipe system made from stainless steel. 2. Water pipe and vacuum system stability and adjustable. 3. Vacuum table adjustable in 3-D direction.
  • Hual-off Part
    Speed range: 0-20m/min. Sychronous of PLC, Vacuum tank and Haul off. ABB invertor controlled.
  • Cutter
    Meter encoder with prescisely and stability. Ring knife design independently controlled. Chiless cutter without PVC dust... Each blade diameter easier changed to sharpner.
Category: More Products

Leave a Reply

Your email address will not be published. Required fields are marked *