You are here: Home » EXTRUSION MACHINERY » Roof Tile Extrusion Line » PVC+ASA/PMMA Roof Tile Extrusion Line » PVC+ASA/PMMA Roof Tile Extrusion Line
PVC+ASA/PMMA Roof Tile Extrusion Line

PVC+ASA/PMMA Roof Tile Extrusion Line Description:

PVC+ASA/PMMA  roof tile production line has small shear rate, not easy to decompose, uniform plasticizing and compounding, high productivity, good quality, good self cleaning, long using life.

This PVC+ASA/PMMA roof tile extrusion machine is mainly used to produce PVC glaze title which width is 720,930,1100mm, thickness is 2mm,2.5mm 3mm.

PVC+ASA/PMMA Roof Tile Extrusion Line

PVC+ASA/PMMA roof tile extrusion machine consists of conical double screw extruder SJZ80/156, single screw co-extruder, extruding tool, forming machines for main tile and ridge tiles, haul-off, cutter, stacker.

This roof tile extrusion line has the advantage of high production efficiency, reasonable structure, convenient operation and maintenance, long use life etc.

PVC+ASA/PMMA Roof Tile Extrusion Line Characteristics:

1. The roof tile extrusion line can be equipped with conical twin screw extruder and parallel twin screw extruder
2. Supply formula guide and staple raw material purchase
3. Professional analyzing and design by considering production cost and title’s performance
4. Single layer or A+B/A+B+C/A+B+A layers available

Complete Roof Tile Production Line:

PVC+ASA/PMMA Roof Tile Extrusion Line

PVC+ASA/PMMA Roof Tile Extrusion Machine Video:

Roof Tile Extrusion Machine Technical Parameter:

Layer Structureof
Roofing Tile
Single Layer Tile
Double Layer Tile
Three Layer Tile(Inner Foaming)
Extruder Configuration
SJZ80/156
SJZ92/188
SJZ80/156+SJ50
SJZ92/188+SJ50
SJZ51/105+SJZ65/132+SJZ51/105
Width of Tile
710-1220mm
710-1220mm
710-1220mm
710-1220mm
710-1220mm
Thickness of Tile
0.8-3.0mm
0.8-3.0mm
2.5-3.0mm
2.5-3.0mm
2.5-3.0mm
Extrusion Capacity
450-550kg/h
600-700kg/h
450-550kg/h
600-700kg/h
400-500kg/h

PVC+ASA/PMMA Roof Tile Extrusion Machine Detail:

  • Products
    Special customization of tile shape, Individual needs, avoiding homogenization of tile products and price wars.
  • T-die Mould
    The hot runner optimization of the mold and distributor reduces the risk of in-mold coke material caused by the large temperature difference between PVC and ASA.
  • Forming Mould Machine
    The forming mould is made of high-quality cast aluminum material, finely polished, and the tile forming effect is good. At the same time, the discharging section is equipped with an air curtain, which can quickly cool down and help increase productivity.
  • Track Cutter
    Blade sinking design + sealed chip suction chamber design to reduce the splashing of PVC chips and protect the on-site environment.
  • Electricity Parts
    All electrical components adopt internationally renowned brands, and the intelligent remote service module realizes online cloud services.
Category: PVC+ASA/PMMA Roof Tile Extrusion Line

Leave a Reply

Your email address will not be published. Required fields are marked *