PVC+ASA Three Layer Roof Tile Extrusion Line

PVC+ASA Roof Tile Extrusion Line Description:

PVC+ASA three layer roof tile extrusion line utilize advanced formulations and co-extrusion technology to continuously produce multi-layered composite building materials with corrugated structure from PVC (polyvinyl chloride) and other auxiliary materials through an automated process. With its high efficiency, high stability, energy saving, and environmental friendliness, the PVC roof tile production line has become advanced equipment in the modern building materials manufacturing field.

Three Layer Roof Tile Extrusion Line

PVC roof tiles (usually double or three layered) are widely used for roofing and wall coverings in industrial plants, agricultural greenhouses, warehouses, carports, and other applications.

PVC+ASA Roof Tile Production Line Parameter:

Layer Structureof Roofing Tile	Single Layer Tile		Double Layer Tile		Three Layer Tile(Inner Foaming)
Extruder Configuration	SJZ80/156	SJZ92/188	SJZ80/156+SJ50	SJZ92/188+SJ50	SJZ51/105+SJZ65/132+SJZ51/105
Width of Tile	710-1220mm	710-1220mm	710-1220mm	710-1220mm	710-1220mm
Thickness of Tile	0.8-3.0mm	0.8-3.0mm	2.5-3.0mm	2.5-3.0mm	2.5-3.0mm
Extrusion Capacity	450-550kg/h	600-700kg/h	450-550kg/h	600-700kg/h	400-500kg/h

PVC+ASA Roof Tile Extrusion Line Advantages:

1. From feeding, extrusion, molding, cutting to stacking, the entire process is automated and continuous, requiring no manual intervention at any single step.

2. Only 1-2 operators are needed to monitor the equipment and feed materials, significantly reducing labor and management costs on the PVC roof tile production line.

3. The PVC roof tile extrusion line is controlled by a central PLC system. Once parameters such as temperature, speed, pressure, and cutting length are set, it can operate stably, reducing human error.

4. The stable production process ensures that the thickness, width, waveform, and color of each corrugated sheet are highly consistent, resulting in a high product qualification rate (typically exceeding 98%) and a strong brand reputation.

5. By changing the extrusion die and shaping table, the PVC roof tile production line can produce different waveforms of sheets in a short time.

PVC+ASA Roof Tile Extrusion Line Video:

Components of Roof Tile Extrusion Line:

Extruder
Three extruders plasticize materials with different formulations and then inject them into a precision co-extrusion die, where they merge to form a three-layer structure that is clearly defined but tightly bonded.
T-die Mould
The hot runner optimization of the mold and distributor reduces the risk of in-mold coke material caused by the large temperature difference between PVC and ASA.
Pattern Roller
Compared with the co-extrusion technology, the ASA film coating process can greatly increase the production capacity and reduce the defective rate caused by the uneven dressing of the public extrusion layer. The temperature is more accurate and stable by temperature controler, especially suitable for ASA coating treatment.
Track Cutter
Blade sinking design + sealed chip suction chamber design to reduce the splashing of PVC chips and protect the on-site environment.
Electricity Parts
All electrical components adopt internationally renowned brands, and the intelligent remote service module realizes online cloud services.