Welcome to BEIER machinery!plastic pipe extrusion, profile extrusion line, roof tile extrusion line, PVC-O extrusion line.

You are here: Home » EXTRUSION BLOG( Page 4 )
EXTRUSION BLOG
  • Beier Machinery is interviewed by International Plastic News

    Beier Machinery: Go forward, go beyond Interviewee: Mr. Liu Feng, the executive vice president of Beier Machinery Group In recent years, a new national brand is shining in China plastic machinery industry. This company was award……

    Time:2017-03-31
  • High impact PVC pipe (pvc-m)

    As we all know, PVC-U pipe application began in the last century 30's, has been more than 70 years of history, is a production technology, experimental testing, standardization, design and construction specifications are relatively mature……

    Time:2017-03-28
  • The three major trends in the future development of plastic pipe extrusion

    Introduction of plastic pipe extrusion At present, the plastic extrusion molding equipment, plastic extruder is usually called the host, experienced a hundred years of development, the extruder has been derived from the original single s……

    Time:2017-03-25
  • Maintenance and cleaning of plastic pipe extrusion

    Just as the car needs to be maintained, your factory's plastic pipe extrusion also needs to be serviced. Usually, the daily maintenance of the single screw extruder can not only reduce the failure of the single screw extruder, but also ex……

    Time:2017-03-20
  • 20-2500-hdpe-water-gas-supply-pipe-extrusion-line
    Plastic pipe extrusion market

    HDPE) pipe with low density, good toughness, small coefficient of friction, corrosion resistance, low temperature resistance, good insulation properties, easy construction and installation of the advantages of high-density polyethylene (H……

    Time:2017-03-15
  • Plastic pipe extrusion forming principle

    The plastic pipe extrusion method of the plastic extruder generally refers to the melting of the plastic at a high temperature of about 200 degrees, and the molten plastic passes through the mold to form the desired shape. Extrusion requi……

    Time:2017-03-07
  • Chinese plastic pipe extrusion industry development potential

    At present, Chinese press industry in the global market structure is changing, highlighting the sharp decline in imports of equipment, of course, the decline in imports does not mean that the decline in foreign equipment utilization, beca……

    Time:2017-03-03
  • Current situation of plastic pipe extrusion market

    In the past two years, Chinese plastic pipe extrusion market has not a small forward and breakthrough in Chinese plastics machinery market, the extruder as an important processing equipment, the development prospects are very optimistic, ……

    Time:2017-03-01
  • The most common molding method of plastic pipe extrusion die

    Plastic pipe extrusion die The most common molding methods are generally divided into melt molding and solid phase molding two categories: Melt molding is the plastic heating to the melting point above, so that it is in the molten state ……

    Time:2017-02-24
  • Causes of damage to screw and barrel of plastic pipe extrusion

    Causes of damage to screw and barrel of plastic pipe extrusion 1, the screw rotation in the barrel, the material and the friction between the two, so that the screw and the barrel of the working surface gradually wear: screw diameter gra……

    Time:2017-02-21
  • The most common molding method of plastic pipe extrusion

    Plastic pipe extrusion  The most common molding methods are generally divided into melt molding and solid phase molding two categories: Melt molding is the plastic heating to the melting point above, so that it is in the molten state of ……

    Time:2017-02-18
  • Plastic pipe extrusion line product introduction

    Plastic pipe extrusion  is mainly used for continuous extrusion molding of polyvinyl chloride, polyethylene, polypropylene and other thermoplastic plastic different specifications of the hard tube, cold bend. The unit consists of conical ……

    Time:2017-02-10